File manager

File manager - Edit - /home/veronikagstoette/public_html/kdump.zip

Back
PK��jD#]i�d&��d&��kdump-logger.shnu�ȯ��#!/bin/bash # # This comes from the dracut-logger.sh # # The logger defined 4 logging levels: # - ddebug (4) # The DEBUG Level designates fine-grained informational events that are most # useful to debug an application. # - dinfo (3) # The INFO level designates informational messages that highlight the # progress of the application at coarse-grained level. # - dwarn (2) # The WARN level designates potentially harmful situations. # - derror (1) # The ERROR level designates error events that might still allow the # application to continue running. # # Logging is controlled by following global variables: # - @var kdump_stdloglvl - logging level to standard error (console output) # - @var kdump_sysloglvl - logging level to syslog (by logger command) # - @var kdump_kmsgloglvl - logging level to /dev/kmsg (only for boot-time) # # If any of the variables is not set, the function dlog_init() sets it to default: # - In the first kernel: # - @var kdump_stdloglvl = 3 (info) # - @var kdump_sysloglvl = 0 (no logging) # - @var kdump_kmsgloglvl = 0 (no logging) # # -In the second kernel: # - @var kdump_stdloglvl = 0 (no logging) # - @var kdump_sysloglvl = 3 (info) # - @var kdump_kmsgloglvl = 0 (no logging) # # First of all you have to start with dlog_init() function which initializes # required variables. Don't call any other logging function before that one! # # Define vairables for the log levels in this module. kdump_stdloglvl="" kdump_sysloglvl="" kdump_kmsgloglvl="" # The dracut-lib.sh is only available in the second kernel, and it won't # be used in the first kernel because the dracut-lib.sh is invisible in # the first kernel. if [ -f /lib/dracut-lib.sh ]; then . /lib/dracut-lib.sh fi # @brief Get the log level from kernel command line. # @retval 1 if something has gone wrong # @retval 0 on success. # get_kdump_loglvl() { (type -p getarg) && kdump_sysloglvl=$(getarg rd.kdumploglvl) [ -z "$kdump_sysloglvl" ] && return 1; (type -p isdigit) && isdigit $kdump_sysloglvl [ $? -ne 0 ] && return 1; return 0 } # @brief Check the log level. # @retval 1 if something has gone wrong # @retval 0 on success. # check_loglvl() { case "$1" in 0\|1\|2\|3\|4) return 0 ;; ) return 1 ;; esac } # @brief Initializes Logger. # @retval 1 if something has gone wrong # @retval 0 on success. # dlog_init() { local ret=0; local errmsg if [ -s /proc/vmcore ];then get_kdump_loglvl if [ $? -ne 0 ];then logger -t "kdump[$$]" -p warn -- "Kdump is using the default log level(3)." kdump_sysloglvl=3 fi kdump_stdloglvl=0 kdump_kmsgloglvl=0 else kdump_stdloglvl=$KDUMP_STDLOGLVL kdump_sysloglvl=$KDUMP_SYSLOGLVL kdump_kmsgloglvl=$KDUMP_KMSGLOGLVL fi [ -z "$kdump_stdloglvl" ] && kdump_stdloglvl=3 [ -z "$kdump_sysloglvl" ] && kdump_sysloglvl=0 [ -z "$kdump_kmsgloglvl" ] && kdump_kmsgloglvl=0 for loglvl in "$kdump_stdloglvl" "$kdump_kmsgloglvl" "$kdump_sysloglvl"; do check_loglvl "$loglvl" if [ $? -ne 0 ]; then echo "Illegal log level: $kdump_stdloglvl $kdump_kmsgloglvl $kdump_sysloglvl" return 1 fi done # Skip initialization if it's already done. [ -n "$kdump_maxloglvl" ] && return 0 if [[ $UID -ne 0 ]]; then kdump_kmsgloglvl=0 kdump_sysloglvl=0 fi if [[ $kdump_sysloglvl -gt 0 ]]; then if [[ -d /run/systemd/journal ]] \ && type -P systemd-cat &>/dev/null \ && systemctl --quiet is-active systemd-journald.socket &>/dev/null; then readonly _systemdcatfile="/var/tmp/systemd-cat" mkfifo "$_systemdcatfile" &>/dev/null readonly _dlogfd=15 systemd-cat -t 'kdump' --level-prefix=true <"$_systemdcatfile" & exec 15>"$_systemdcatfile" elif ! [ -S /dev/log -a -w /dev/log ] \|\| ! command -v logger >/dev/null; then # We cannot log to syslog, so turn this facility off. kdump_kmsgloglvl=$kdump_sysloglvl kdump_sysloglvl=0 ret=1 errmsg="No '/dev/log' or 'logger' included for syslog logging" fi fi local lvl; local maxloglvl_l=0 for lvl in $kdump_stdloglvl $kdump_sysloglvl $kdump_kmsgloglvl; do [[ $lvl -gt $maxloglvl_l ]] && maxloglvl_l=$lvl done readonly kdump_maxloglvl=$maxloglvl_l export kdump_maxloglvl if [[ $kdump_stdloglvl -lt 4 ]] && [[ $kdump_kmsgloglvl -lt 4 ]] && [[ $kdump_sysloglvl -lt 4 ]]; then unset ddebug ddebug() { :; }; fi if [[ $kdump_stdloglvl -lt 3 ]] && [[ $kdump_kmsgloglvl -lt 3 ]] && [[ $kdump_sysloglvl -lt 3 ]]; then unset dinfo dinfo() { :; }; fi if [[ $kdump_stdloglvl -lt 2 ]] && [[ $kdump_kmsgloglvl -lt 2 ]] && [[ $kdump_sysloglvl -lt 2 ]]; then unset dwarn dwarn() { :; }; unset dwarning dwarning() { :; }; fi if [[ $kdump_stdloglvl -lt 1 ]] && [[ $kdump_kmsgloglvl -lt 1 ]] && [[ $kdump_sysloglvl -lt 1 ]]; then unset derror derror() { :; }; fi [ -n "$errmsg" ] && derror "$errmsg" return $ret } ## @brief Converts numeric level to logger priority defined by POSIX.2. # # @param lvl Numeric logging level in range from 1 to 4. # @retval 1 if @a lvl is out of range. # @retval 0 if @a lvl is correct. # @result Echoes logger priority. _lvl2syspri() { case "$1" in 1) echo error;; 2) echo warning;; 3) echo info;; 4) echo debug;; ) return 1;; esac } ## @brief Converts logger numeric level to syslog log level # # @param lvl Numeric logging level in range from 1 to 4. # @retval 1 if @a lvl is out of range. # @retval 0 if @a lvl is correct. # @result Echoes kernel console numeric log level # # Conversion is done as follows: # # <tt> # none -> LOG_EMERG (0) # none -> LOG_ALERT (1) # none -> LOG_CRIT (2) # ERROR(1) -> LOG_ERR (3) # WARN(2) -> LOG_WARNING (4) # none -> LOG_NOTICE (5) # INFO(3) -> LOG_INFO (6) # DEBUG(4) -> LOG_DEBUG (7) # </tt> # # @see /usr/include/sys/syslog.h _dlvl2syslvl() { local lvl case "$1" in 1) lvl=3;; 2) lvl=4;; 3) lvl=6;; 4) lvl=7;; ) return 1;; esac # The number is constructed by multiplying the facility by 8 and then # adding the level. # About The Syslog Protocol, please refer to the RFC5424 for more details. echo $((24+$lvl)) } ## @brief Prints to stderr, to syslog and/or /dev/kmsg given message with # given level (priority). # # @param lvl Numeric logging level. # @param msg Message. # @retval 0 It's always returned, even if logging failed. # # @note This function is not supposed to be called manually. Please use # dinfo(), ddebug(), or others instead which wrap this one. # # This is core logging function which logs given message to standard error # and/or syslog (with POSIX shell command <tt>logger</tt>) and/or to /dev/kmsg. # The format is following: # # <tt>X: some message</tt> # # where @c X is the first letter of logging level. See module description for # details on that. # # Message to syslog is sent with tag @c kdump. Priorities are mapped as # following: # - @c ERROR to @c error # - @c WARN to @c warning # - @c INFO to @c info # - @c DEBUG to @c debug _do_dlog() { local lvl="$1"; shift local msg="$" [[ $lvl -le $kdump_stdloglvl ]] && printf -- 'kdump: %s\n' "$msg" >&2 if [[ $lvl -le $kdump_sysloglvl ]]; then if [[ "$_dlogfd" ]]; then printf -- "<%s>%s\n" "$(($(_dlvl2syslvl $lvl) & 7))" "$msg" >&$_dlogfd else logger -t "kdump[$$]" -p $(_lvl2syspri $lvl) -- "$msg" fi fi [[ $lvl -le $kdump_kmsgloglvl ]] && \ echo "<$(_dlvl2syslvl $lvl)>kdump[$$] $msg" >/dev/kmsg } ## @brief Internal helper function for _do_dlog() # # @param lvl Numeric logging level. # @param msg Message. # @retval 0 It's always returned, even if logging failed. # # @note This function is not supposed to be called manually. Please use # dinfo(), ddebug(), or others instead which wrap this one. # # This function calls _do_dlog() either with parameter msg, or if # none is given, it will read standard input and will use every line as # a message. # # This enables: # dwarn "This is a warning" # echo "This is a warning" \| dwarn dlog() { [ -z "$kdump_maxloglvl" ] && return 0 [[ $1 -le $kdump_maxloglvl ]] \|\| return 0 if [[ $# -gt 1 ]]; then _do_dlog "$@" else while read line \|\| [ -n "$line" ]; do _do_dlog "$1" "$line" done fi } ## @brief Logs message at DEBUG level (4) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. ddebug() { set +x dlog 4 "$@" [ -n "$debug" ] && set -x \|\| : } ## @brief Logs message at INFO level (3) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. dinfo() { set +x dlog 3 "$@" [ -n "$debug" ] && set -x \|\| : } ## @brief Logs message at WARN level (2) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. dwarn() { set +x dlog 2 "$@" [ -n "$debug" ] && set -x \|\| : } ## @brief It's an alias to dwarn() function. # # @param msg Message. # @retval 0 It's always returned, even if logging failed. dwarning() { set +x dwarn "$@" [ -n "$debug" ] && set -x \|\| : } ## @brief Logs message at ERROR level (1) # # @param msg Message. # @retval 0 It's always returned, even if logging failed. derror() { set +x dlog 1 "$@" [ -n "$debug" ] && set -x \|\| : } PK��jD#]9e/��kdump-lib-initramfs.shnu��[��# These variables and functions are useful in 2nd kernel . /lib/kdump-lib.sh . /lib/kdump-logger.sh KDUMP_PATH="/var/crash" KDUMP_LOG_FILE="/run/initramfs/kexec-dmesg.log" CORE_COLLECTOR="" DEFAULT_CORE_COLLECTOR="makedumpfile -l --message-level 7 -d 31" DMESG_COLLECTOR="/sbin/vmcore-dmesg" FAILURE_ACTION="systemctl reboot -f" DATEDIR=`date +%Y-%m-%d-%T` HOST_IP='127.0.0.1' DUMP_INSTRUCTION="" SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa" KDUMP_SCRIPT_DIR="/kdumpscripts" DD_BLKSIZE=512 FINAL_ACTION="systemctl reboot -f" KDUMP_CONF="/etc/kdump.conf" KDUMP_PRE="" KDUMP_POST="" NEWROOT="/sysroot" OPALCORE="/sys/firmware/opal/mpipl/core" #initiate the kdump logger dlog_init if [ $? -ne 0 ]; then echo "failed to initiate the kdump logger." exit 1 fi get_kdump_confs() { local config_opt config_val while read config_opt config_val; do # remove inline comments after the end of a directive. case "$config_opt" in path) KDUMP_PATH="$config_val" ;; core_collector) [ -n "$config_val" ] && CORE_COLLECTOR="$config_val" ;; sshkey) if [ -f "$config_val" ]; then SSH_KEY_LOCATION=$config_val fi ;; kdump_pre) KDUMP_PRE="$config_val" ;; kdump_post) KDUMP_POST="$config_val" ;; fence_kdump_args) FENCE_KDUMP_ARGS="$config_val" ;; fence_kdump_nodes) FENCE_KDUMP_NODES="$config_val" ;; failure_action\|default) case $config_val in shell) FAILURE_ACTION="kdump_emergency_shell" ;; reboot) FAILURE_ACTION="systemctl reboot -f && exit" ;; halt) FAILURE_ACTION="halt && exit" ;; poweroff) FAILURE_ACTION="systemctl poweroff -f && exit" ;; dump_to_rootfs) FAILURE_ACTION="dump_to_rootfs" ;; esac ;; final_action) case $config_val in reboot) FINAL_ACTION="systemctl reboot -f" ;; halt) FINAL_ACTION="halt" ;; poweroff) FINAL_ACTION="systemctl poweroff -f" ;; esac ;; esac done <<< "$(read_strip_comments $KDUMP_CONF)" if [ -z "$CORE_COLLECTOR" ]; then CORE_COLLECTOR="$DEFAULT_CORE_COLLECTOR" if is_ssh_dump_target \|\| is_raw_dump_target; then CORE_COLLECTOR="$CORE_COLLECTOR -F" fi fi } # store the kexec kernel log to a file. save_log() { dmesg -T > $KDUMP_LOG_FILE if command -v journalctl > /dev/null; then journalctl -ab >> $KDUMP_LOG_FILE fi chmod 600 $KDUMP_LOG_FILE } # dump_fs <mount point> dump_fs() { local _exitcode local _mp=$1 ddebug "dump_fs _mp=$_mp" if ! is_mounted "$_mp"; then dinfo "dump path \"$_mp\" is not mounted, trying to mount..." mount --target $_mp if [ $? -ne 0 ]; then derror "failed to dump to \"$_mp\", it's not a mount point!" return 1 fi fi # Remove -F in makedumpfile case. We don't want a flat format dump here. [[ $CORE_COLLECTOR = makedumpfile ]] && CORE_COLLECTOR=`echo $CORE_COLLECTOR \| sed -e "s/-F//g"` dinfo "saving to $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/" mount -o remount,rw $_mp \|\| return 1 mkdir -p $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR \|\| return 1 save_vmcore_dmesg_fs ${DMESG_COLLECTOR} "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/" save_opalcore_fs "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/" dinfo "saving vmcore" $CORE_COLLECTOR /proc/vmcore $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete _exitcode=$? if [ $_exitcode -eq 0 ]; then sync -f "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete" _sync_exitcode=$? if [ $_sync_exitcode -eq 0 ]; then mv "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore-incomplete" "$_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/vmcore" dinfo "saving vmcore complete" else derror "sync vmcore failed, _exitcode:$_sync_exitcode" return 1 fi else derror "saving vmcore failed, _exitcode:$_exitcode" fi dinfo "saving the $KDUMP_LOG_FILE to $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/" save_log mv $KDUMP_LOG_FILE $_mp/$KDUMP_PATH/$HOST_IP-$DATEDIR/ if [ $_exitcode -ne 0 ]; then return 1 fi # improper kernel cmdline can cause the failure of echo, we can ignore this kind of failure return 0 } save_vmcore_dmesg_fs() { local _dmesg_collector=$1 local _path=$2 dinfo "saving vmcore-dmesg.txt to ${_path}" $_dmesg_collector /proc/vmcore > ${_path}/vmcore-dmesg-incomplete.txt _exitcode=$? if [ $_exitcode -eq 0 ]; then mv ${_path}/vmcore-dmesg-incomplete.txt ${_path}/vmcore-dmesg.txt chmod 600 ${_path}/vmcore-dmesg.txt # Make sure file is on disk. There have been instances where later # saving vmcore failed and system rebooted without sync and there # was no vmcore-dmesg.txt available. sync dinfo "saving vmcore-dmesg.txt complete" else derror "saving vmcore-dmesg.txt failed" fi } save_opalcore_fs() { local _path=$1 if [ ! -f $OPALCORE ]; then # Check if we are on an old kernel that uses a different path if [ -f /sys/firmware/opal/core ]; then OPALCORE="/sys/firmware/opal/core" else return 0 fi fi dinfo "saving opalcore:$OPALCORE to ${_path}/opalcore" cp $OPALCORE ${_path}/opalcore if [ $? -ne 0 ]; then derror "saving opalcore failed" return 1 fi sync dinfo "saving opalcore complete" return 0 } dump_to_rootfs() { dinfo "Trying to bring up rootfs device" systemctl start dracut-initqueue dinfo "Waiting for rootfs mount, will timeout after 90 seconds" systemctl start sysroot.mount ddebug "NEWROOT=$NEWROOT" dump_fs $NEWROOT } kdump_emergency_shell() { echo "PS1=\"kdump:\\\${PWD}# \"" >/etc/profile ddebug "Switching to dracut emergency..." /bin/dracut-emergency rm -f /etc/profile } do_failure_action() { dinfo "Executing failure action $FAILURE_ACTION" eval $FAILURE_ACTION } do_final_action() { dinfo "Executing final action $FINAL_ACTION" eval $FINAL_ACTION } PK��jD#]��y{��y{��kdump-lib.shnu�ȯ��#!/bin/sh # # Kdump common variables and functions # DEFAULT_PATH="/var/crash/" FENCE_KDUMP_CONFIG_FILE="/etc/sysconfig/fence_kdump" FENCE_KDUMP_SEND="/usr/libexec/fence_kdump_send" FADUMP_ENABLED_SYS_NODE="/sys/kernel/fadump_enabled" LVM_CONF="/etc/lvm/lvm.conf" is_fadump_capable() { # Check if firmware-assisted dump is enabled # if no, fallback to kdump check if [ -f $FADUMP_ENABLED_SYS_NODE ]; then rc=`cat $FADUMP_ENABLED_SYS_NODE` [ $rc -eq 1 ] && return 0 fi return 1 } is_squash_available() { for kmodule in squashfs overlay loop; do if [ -z "$KDUMP_KERNELVER" ]; then modprobe --dry-run $kmodule &>/dev/null \|\| return 1 else modprobe -S $KDUMP_KERNELVER --dry-run $kmodule &>/dev/null \|\| return 1 fi done } perror_exit() { derror "$@" exit 1 } is_ssh_dump_target() { grep -q "^ssh[[:blank:]].@" /etc/kdump.conf } is_nfs_dump_target() { grep -q "^nfs" /etc/kdump.conf \|\| \ [[ $(get_dracut_args_fstype "$(grep "^dracut_args .\-\-mount" /etc/kdump.conf)") = nfs* ]] } is_raw_dump_target() { grep -q "^raw" /etc/kdump.conf } is_fs_type_nfs() { local _fstype=$1 [ $_fstype = "nfs" ] \|\| [ $_fstype = "nfs4" ] && return 0 return 1 } is_fs_dump_target() { egrep -q "^ext[234]\|^xfs\|^btrfs\|^minix" /etc/kdump.conf } is_lvm2_thinp_device() { _device_path=$1 _lvm2_thin_device=$(lvm lvs -S 'lv_layout=sparse && lv_layout=thin' \ --nosuffix --noheadings -o vg_name,lv_name "$_device_path" 2> /dev/null) [ -n "$_lvm2_thin_device" ] } strip_comments() { echo $@ \| sed -e 's/$.$#./\1/' } # Read from kdump config file stripping all comments read_strip_comments() { # strip heading spaces, and print any content starting with # neither space or #, and strip everything after # sed -n -e "s/^\s$[^# \t][^#]\+$./\1/gp" $1 } # Check if fence kdump is configured in Pacemaker cluster is_pcs_fence_kdump() { # no pcs or fence_kdump_send executables installed? type -P pcs > /dev/null \|\| return 1 [ -x $FENCE_KDUMP_SEND ] \|\| return 1 # fence kdump not configured? (pcs cluster cib \| grep 'type="fence_kdump"') &> /dev/null \|\| return 1 } # Check if fence_kdump is configured using kdump options is_generic_fence_kdump() { [ -x $FENCE_KDUMP_SEND ] \|\| return 1 grep -q "^fence_kdump_nodes" /etc/kdump.conf } to_dev_name() { local dev="${1//\"/}" case "$dev" in UUID=) dev=`blkid -U "${dev#UUID=}"` ;; LABEL=) dev=`blkid -L "${dev#LABEL=}"` ;; esac echo $dev } is_user_configured_dump_target() { return $(is_mount_in_dracut_args \|\| is_ssh_dump_target \|\| is_nfs_dump_target \|\| \ is_raw_dump_target \|\| is_fs_dump_target) } get_user_configured_dump_disk() { local _target _target=$(egrep "^ext[234]\|^xfs\|^btrfs\|^minix\|^raw" /etc/kdump.conf 2>/dev/null \|awk '{print $2}') [ -n "$_target" ] && echo $_target && return _target=$(get_dracut_args_target "$(grep "^dracut_args .\-\-mount" /etc/kdump.conf)") [ -b "$_target" ] && echo $_target } get_root_fs_device() { findmnt -k -f -n -o SOURCE / } get_save_path() { local _save_path=$(awk '$1 == "path" {print $2}' /etc/kdump.conf) [ -z "$_save_path" ] && _save_path=$DEFAULT_PATH # strip the duplicated "/" echo $_save_path \| tr -s / } get_block_dump_target() { local _target _path if is_ssh_dump_target \|\| is_nfs_dump_target; then return fi _target=$(get_user_configured_dump_disk) [ -n "$_target" ] && echo $(to_dev_name $_target) && return # Get block device name from local save path _path=$(get_save_path) _target=$(get_target_from_path $_path) [ -b "$_target" ] && echo $(to_dev_name $_target) } is_dump_to_rootfs() { grep -E "^(failure_action\|default)[[:space:]]dump_to_rootfs" /etc/kdump.conf >/dev/null } is_lvm2_thinp_dump_target() { _target=$(get_block_dump_target) [ -n "$_target" ] && is_lvm2_thinp_device "$_target" } get_failure_action_target() { local _target if is_dump_to_rootfs; then # Get rootfs device name _target=$(get_root_fs_device) [ -b "$_target" ] && echo $(to_dev_name $_target) && return # Then, must be nfs root echo "nfs" fi } # Get kdump targets(including root in case of dump_to_rootfs). get_kdump_targets() { local _target _root local kdump_targets _target=$(get_block_dump_target) if [ -n "$_target" ]; then kdump_targets=$_target elif is_ssh_dump_target; then kdump_targets="ssh" else kdump_targets="nfs" fi # Add the root device if dump_to_rootfs is specified. _root=$(get_failure_action_target) if [ -n "$_root" -a "$kdump_targets" != "$_root" ]; then kdump_targets="$kdump_targets $_root" fi echo "$kdump_targets" } # Return the bind mount source path, return the path itself if it's not bind mounted # Eg. if /path/to/src is bind mounted to /mnt/bind, then: # /mnt/bind -> /path/to/src, /mnt/bind/dump -> /path/to/src/dump # # findmnt uses the option "-v, --nofsroot" to exclusive the [/dir] # in the SOURCE column for bind-mounts, then if $_mntpoint equals to # $_mntpoint_nofsroot, the mountpoint is not bind mounted directory. # # Below is just an example for mount info # /dev/mapper/atomicos-root[/ostree/deploy/rhel-atomic-host/var], if the # directory is bind mounted. The former part represents the device path, rest # part is the bind mounted directory which quotes by bracket "[]". get_bind_mount_source() { local _path=$1 # In case it's a sub path in a mount point, get the mount point first local _mnt_top=$(df $_path \| tail -1 \| awk '{print $NF}') local _mntpoint=$(findmnt $_mnt_top \| tail -n 1 \| awk '{print $2}') local _mntpoint_nofsroot=$(findmnt -v $_mnt_top \| tail -n 1 \| awk '{print $2}') if [[ "$_mntpoint" = $_mntpoint_nofsroot ]]; then echo $_path && return fi _mntpoint=${_mntpoint#$_mntpoint_nofsroot} _mntpoint=${_mntpoint#[} _mntpoint=${_mntpoint%]} _path=${_path#$_mnt_top} echo $_mntpoint$_path } # Return the current underlaying device of a path, ignore bind mounts get_target_from_path() { local _target _target=$(df $1 2>/dev/null \| tail -1 \| awk '{print $1}') [[ "$_target" == "/dev/root" ]] && [[ ! -e /dev/root ]] && _target=$(get_root_fs_device) echo $_target } is_mounted() { findmnt -k -n $1 &>/dev/null } get_mount_info() { local _info_type=$1 _src_type=$2 _src=$3; shift 3 local _info=$(findmnt -k -n -r -o $_info_type --$_src_type $_src $@) [ -z "$_info" ] && [ -e "/etc/fstab" ] && _info=$(findmnt -s -n -r -o $_info_type --$_src_type $_src $@) echo $_info } get_fs_type_from_target() { get_mount_info FSTYPE source $1 -f } get_mntopt_from_target() { get_mount_info OPTIONS source $1 -f } # Find the general mount point of a dump target, not the bind mount point get_mntpoint_from_target() { # Expcilitly specify --source to findmnt could ensure non-bind mount is returned get_mount_info TARGET source $1 -f } # Get the path where the target will be mounted in kdump kernel # $1: kdump target device get_kdump_mntpoint_from_target() { local _mntpoint=$(get_mntpoint_from_target $1) # mount under /sysroot if dump to root disk or mount under # mount under /kdumproot if dump target is not mounted in first kernel # mount under /kdumproot/$_mntpoint in other cases in 2nd kernel. # systemd will be in charge to umount it. if [ -z "$_mntpoint" ];then _mntpoint="/kdumproot" else if [ "$_mntpoint" = "/" ];then _mntpoint="/sysroot" else _mntpoint="/kdumproot/$_mntpoint" fi fi # strip duplicated "/" echo $_mntpoint \| tr -s "/" } # get_option_value <option_name> # retrieves value of option defined in kdump.conf get_option_value() { strip_comments `grep "^$1[[:space:]]\+" /etc/kdump.conf \| tail -1 \| cut -d\ -f2-` } kdump_get_persistent_dev() { local dev="${1//\"/}" case "$dev" in UUID=) dev=`blkid -U "${dev#UUID=}"` ;; LABEL=) dev=`blkid -L "${dev#LABEL=}"` ;; esac echo $(get_persistent_dev "$dev") } is_ostree() { test -f /run/ostree-booted } # fixme, try the best to decide whether the ipv6 addr is allocated by slaac or dhcp6 is_ipv6_auto() { local _netdev=$1 local _auto=$(cat /proc/sys/net/ipv6/conf/$_netdev/autoconf) if [ $_auto -eq 1 ]; then return 0 else return 1 fi } is_ipv6_address() { echo $1 \| grep -q ":" } # get ip address or hostname from nfs/ssh config value get_remote_host() { local _config_val=$1 # ipv6 address in kdump.conf is around with "[]", # factor out the ipv6 address _config_val=${_config_val#@} _config_val=${_config_val%:/} _config_val=${_config_val#[} _config_val=${_config_val%]} echo $_config_val } is_hostname() { local _hostname=`echo $1 \| grep ":"` if [ -n "$_hostname" ]; then return 1 fi echo $1 \| grep -q "[a-zA-Z]" } # Copied from "/etc/sysconfig/network-scripts/network-functions" get_hwaddr() { if [ -f "/sys/class/net/${1}/address" ]; then awk '{ print toupper($0) }' < /sys/class/net/${1}/address elif [ -d "/sys/class/net/${1}" ]; then LC_ALL= LANG= ip -o link show ${1} 2>/dev/null \| \ awk '{ print toupper(gensub(/.link\/[^ ] ([[:alnum:]:])./, "\\1", 1)); }' fi } get_ifcfg_by_device() { grep -E -i -l "^[[:space:]]DEVICE=\"${1}\"[[:space:]]$" \ /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null \| head -1 } get_ifcfg_by_hwaddr() { grep -E -i -l "^[[:space:]]HWADDR=\"${1}\"[[:space:]]$" \ /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null \| head -1 } get_ifcfg_by_uuid() { grep -E -i -l "^[[:space:]]UUID=\"${1}\"[[:space:]]$" \ /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null \| head -1 } get_ifcfg_by_name() { grep -E -i -l "^[[:space:]]NAME=\"${1}\"[[:space:]]$" \ /etc/sysconfig/network-scripts/ifcfg-* 2>/dev/null \| head -1 } is_nm_running() { [ "$(LANG=C nmcli -t --fields running general status 2>/dev/null)" = "running" ] } is_nm_handling() { LANG=C nmcli -t --fields device,state dev status 2>/dev/null \ \| grep -q "^$${1}:connected$\\|$${1}:connecting.$$" } # $1: netdev name get_ifcfg_nmcli() { local nm_uuid nm_name local ifcfg_file # Get the active nmcli config name of $1 if is_nm_running && is_nm_handling "${1}" ; then # The configuration "uuid" and "name" generated by nm is wrote to # the ifcfg file as "UUID=<nm_uuid>" and "NAME=<nm_name>". nm_uuid=$(LANG=C nmcli -t --fields uuid,device c show --active 2>/dev/null \ \| grep "${1}" \| head -1 \| cut -d':' -f1) nm_name=$(LANG=C nmcli -t --fields name,device c show --active 2>/dev/null \ \| grep "${1}" \| head -1 \| cut -d':' -f1) ifcfg_file=$(get_ifcfg_by_uuid "${nm_uuid}") [ -z "${ifcfg_file}" ] && ifcfg_file=$(get_ifcfg_by_name "${nm_name}") fi echo -n "${ifcfg_file}" } # $1: netdev name get_ifcfg_legacy() { local ifcfg_file ifcfg_file="/etc/sysconfig/network-scripts/ifcfg-${1}" [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return ifcfg_file=$(get_ifcfg_by_name "${1}") [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return local hwaddr=$(get_hwaddr "${1}") if [ -n "$hwaddr" ]; then ifcfg_file=$(get_ifcfg_by_hwaddr "${hwaddr}") [ -f "${ifcfg_file}" ] && echo -n "${ifcfg_file}" && return fi ifcfg_file=$(get_ifcfg_by_device "${1}") echo -n "${ifcfg_file}" } # $1: netdev name # Return the ifcfg file whole name(including the path) of $1 if any. get_ifcfg_filename() { local ifcfg_file ifcfg_file=$(get_ifcfg_nmcli "${1}") if [ -z "${ifcfg_file}" ]; then ifcfg_file=$(get_ifcfg_legacy "${1}") fi echo -n "${ifcfg_file}" } # returns 0 when omission of a module is desired in dracut_args # returns 1 otherwise is_dracut_mod_omitted() { local dracut_args dracut_mod=$1 set -- $(grep "^dracut_args" /etc/kdump.conf) while [ $# -gt 0 ]; do case $1 in -o\|--omit) [[ " ${2//[^[:alnum:]]/ } " == " $dracut_mod "* ]] && return 0 esac shift done return 1 } is_wdt_active() { local active [ -d /sys/class/watchdog ] \|\| return 1 for dir in /sys/class/watchdog/; do [ -f "$dir/state" ] \|\| continue active=$(< "$dir/state") [ "$active" = "active" ] && return 0 done return 1 } # If "dracut_args" contains "--mount" information, use it # directly without any check(users are expected to ensure # its correctness). is_mount_in_dracut_args() { grep -q "^dracut_args .\-\-mount" /etc/kdump.conf } # If $1 contains dracut_args "--mount", return <filesystem type> get_dracut_args_fstype() { echo $1 \| grep "\-\-mount" \| sed "s/.--mount .$.$/\1/" \| cut -d' ' -f3 } # If $1 contains dracut_args "--mount", return <device> get_dracut_args_target() { echo $1 \| grep "\-\-mount" \| sed "s/.--mount .$.$/\1/" \| cut -d' ' -f1 } get_reserved_mem_size() { local reserved_mem_size=0 if is_fadump_capable; then reserved_mem_size=$(< /sys/kernel/fadump/mem_reserved) else reserved_mem_size=$(< /sys/kernel/kexec_crash_size) fi echo "$reserved_mem_size" } check_crash_mem_reserved() { local mem_reserved mem_reserved=$(get_reserved_mem_size) if [ $mem_reserved -eq 0 ]; then derror "No memory reserved for crash kernel" return 1 fi return 0 } check_kdump_feasibility() { if [ ! -e /sys/kernel/kexec_crash_loaded ]; then derror "Kdump is not supported on this kernel" return 1 fi check_crash_mem_reserved return $? } check_current_kdump_status() { if [ ! -f /sys/kernel/kexec_crash_loaded ];then derror "Perhaps CONFIG_CRASH_DUMP is not enabled in kernel" return 1 fi rc=`cat /sys/kernel/kexec_crash_loaded` if [ $rc == 1 ]; then return 0 else return 1 fi } # remove_cmdline_param <kernel cmdline> <param1> [<param2>] ... [<paramN>] # Remove a list of kernel parameters from a given kernel cmdline and print the result. # For each "arg" in the removing params list, "arg" and "arg=xxx" will be removed if exists. remove_cmdline_param() { local cmdline=$1 shift for arg in $@; do cmdline=`echo $cmdline \| \ sed -e "s/\b$arg=[^ ]//g" \ -e "s/^$arg\b//g" \ -e "s/[[:space:]]$arg\b//g" \ -e "s/\s\+/ /g"` done echo $cmdline } # # This function returns the "apicid" of the boot # cpu (cpu 0) if present. # get_bootcpu_apicid() { awk ' \ BEGIN { CPU = "-1"; } \ $1=="processor" && $2==":" { CPU = $NF; } \ CPU=="0" && /^apicid/ { print $NF; } \ ' \ /proc/cpuinfo } # # append_cmdline <kernel cmdline> <parameter name> <parameter value> # This function appends argument "$2=$3" to string ($1) if not already present. # append_cmdline() { local cmdline=$1 local newstr=${cmdline/$2/""} # unchanged str implies argument wasn't there if [ "$cmdline" == "$newstr" ]; then cmdline="${cmdline} ${2}=${3}" fi echo $cmdline } # This function check iomem and determines if we have more than # 4GB of ram available. Returns 1 if we do, 0 if we dont need_64bit_headers() { return `tail -n 1 /proc/iomem \| awk '{ split ($1, r, "-"); \ print (strtonum("0x" r[2]) > strtonum("0xffffffff")); }'` } # Check if secure boot is being enforced. # # Per Peter Jones, we need check efivar SecureBoot-$(the UUID) and # SetupMode-$(the UUID), they are both 5 bytes binary data. The first four # bytes are the attributes associated with the variable and can safely be # ignored, the last bytes are one-byte true-or-false variables. If SecureBoot # is 1 and SetupMode is 0, then secure boot is being enforced. # # Assume efivars is mounted at /sys/firmware/efi/efivars. is_secure_boot_enforced() { local secure_boot_file setup_mode_file local secure_boot_byte setup_mode_byte # On powerpc, secure boot is enforced if: # host secure boot: /ibm,secure-boot/os-secureboot-enforcing DT property exists # guest secure boot: /ibm,secure-boot >= 2 if [ -f /proc/device-tree/ibm,secureboot/os-secureboot-enforcing ]; then return 0 fi if [ -f /proc/device-tree/ibm,secure-boot ] && \ [ $(lsprop /proc/device-tree/ibm,secure-boot \| tail -1) -ge 2 ]; then return 0 fi # Detect secure boot on x86 and arm64 secure_boot_file=$(find /sys/firmware/efi/efivars -name SecureBoot- 2>/dev/null) setup_mode_file=$(find /sys/firmware/efi/efivars -name SetupMode-* 2>/dev/null) if [ -f "$secure_boot_file" ] && [ -f "$setup_mode_file" ]; then secure_boot_byte=$(hexdump -v -e '/1 "%d\ "' $secure_boot_file\|cut -d' ' -f 5) setup_mode_byte=$(hexdump -v -e '/1 "%d\ "' $setup_mode_file\|cut -d' ' -f 5) if [ "$secure_boot_byte" = "1" ] && [ "$setup_mode_byte" = "0" ]; then return 0 fi fi # Detect secure boot on s390x if [[ -e "/sys/firmware/ipl/secure" && "$(cat /sys/firmware/ipl/secure)" == "1" ]]; then return 0 fi return 1 } # # prepare_kexec_args <kexec args> # This function prepares kexec argument. # prepare_kexec_args() { local kexec_args=$1 local found_elf_args ARCH=`uname -m` if [ "$ARCH" == "i686" -o "$ARCH" == "i386" ] then need_64bit_headers if [ $? == 1 ] then found_elf_args=`echo $kexec_args \| grep elf32-core-headers` if [ -n "$found_elf_args" ] then dwarn "Warning: elf32-core-headers overrides correct elf64 setting" else kexec_args="$kexec_args --elf64-core-headers" fi else found_elf_args=`echo $kexec_args \| grep elf64-core-headers` if [ -z "$found_elf_args" ] then kexec_args="$kexec_args --elf32-core-headers" fi fi fi # For secureboot enabled machines, use new kexec file based syscall. # Old syscall will always fail as it does not have capability to do # kernel signature verification. if is_secure_boot_enforced; then dinfo "Secure Boot is enabled. Using kexec file based syscall." kexec_args="$kexec_args -s" fi echo $kexec_args } # prepare_kdump_kernel <kdump_kernelver> # This function return kdump_kernel given a kernel version. prepare_kdump_kernel() { local kdump_kernelver=$1 local dir img boot_dirlist boot_imglist kdump_kernel machine_id read -r machine_id < /etc/machine-id boot_dirlist=${KDUMP_BOOTDIR:-"/boot /boot/efi /efi /"} boot_imglist="$KDUMP_IMG-$kdump_kernelver$KDUMP_IMG_EXT $machine_id/$kdump_kernelver/$KDUMP_IMG" # The kernel of OSTree based systems is not in the standard locations. if is_ostree; then boot_dirlist="$(echo /boot/ostree/) $boot_dirlist" fi # Use BOOT_IMAGE as reference if possible, strip the GRUB root device prefix in (hd0,gpt1) format boot_img="$(grep -P -o '^BOOT_IMAGE=(\S+)' /proc/cmdline \| sed "s/^BOOT_IMAGE=$(\S)$\?$\S$/\2/")" if [[ "$boot_img" == "$kdump_kernelver" ]]; then boot_imglist="$boot_img $boot_imglist" fi for dir in $boot_dirlist; do for img in $boot_imglist; do if [[ -f "$dir/$img" ]]; then kdump_kernel=$(echo "$dir/$img" \| tr -s '/') break 2 fi done done echo "$kdump_kernel" } # # Detect initrd and kernel location, results are stored in global enviromental variables: # KDUMP_BOOTDIR, KDUMP_KERNELVER, KDUMP_KERNEL, DEFAULT_INITRD, and KDUMP_INITRD # # Expectes KDUMP_BOOTDIR, KDUMP_IMG, KDUMP_IMG_EXT, KDUMP_KERNELVER to be loaded from config already # and will prefer already set values so user can specify custom kernel/initramfs location # prepare_kdump_bootinfo() { local boot_initrdlist nondebug_kernelver debug_kernelver local default_initrd_base var_target_initrd_dir if [[ -z $KDUMP_KERNELVER ]]; then KDUMP_KERNELVER=$(uname -r) # Fadump uses the regular bootloader, unlike kdump. So, use the same version # for default kernel and capture kernel unless specified explicitly with # KDUMP_KERNELVER option. if ! is_fadump_capable; then nondebug_kernelver=$(sed -n -e 's/$.$+debug$/\1/p' <<< "$KDUMP_KERNELVER") fi fi # Use nondebug kernel if possible, because debug kernel will consume more memory and may oom. if [[ -n $nondebug_kernelver ]]; then dinfo "Trying to use $nondebug_kernelver." debug_kernelver=$KDUMP_KERNELVER KDUMP_KERNELVER=$nondebug_kernelver fi KDUMP_KERNEL=$(prepare_kdump_kernel "$KDUMP_KERNELVER") if ! [[ -e $KDUMP_KERNEL ]]; then if [[ -n $debug_kernelver ]]; then dinfo "Fallback to using debug kernel" KDUMP_KERNELVER=$debug_kernelver KDUMP_KERNEL=$(prepare_kdump_kernel "$KDUMP_KERNELVER") fi fi if ! [[ -e $KDUMP_KERNEL ]]; then derror "Failed to detect kdump kernel location" return 1 fi if [[ "$KDUMP_KERNEL" == "+debug" ]]; then dwarn "Using debug kernel, you may need to set a larger crashkernel than the default value." fi # Set KDUMP_BOOTDIR to where kernel image is stored KDUMP_BOOTDIR=$(dirname "$KDUMP_KERNEL") # Default initrd should just stay aside of kernel image, try to find it in KDUMP_BOOTDIR boot_initrdlist="initramfs-$KDUMP_KERNELVER.img initrd" for initrd in $boot_initrdlist; do if [[ -f "$KDUMP_BOOTDIR/$initrd" ]]; then default_initrd_base="$initrd" DEFAULT_INITRD="$KDUMP_BOOTDIR/$default_initrd_base" break fi done # Create kdump initrd basename from default initrd basename # initramfs-5.7.9-200.fc32.x86_64.img => initramfs-5.7.9-200.fc32.x86_64kdump.img # initrd => initrdkdump if [[ -z $default_initrd_base ]]; then kdump_initrd_base=initramfs-${KDUMP_KERNELVER}kdump.img elif [[ $default_initrd_base == . ]]; then kdump_initrd_base=${default_initrd_base%.}kdump.${DEFAULT_INITRD##.} else kdump_initrd_base=${default_initrd_base}kdump fi # Place kdump initrd in $(/var/lib/kdump) if $(KDUMP_BOOTDIR) not writable if [[ ! -w $KDUMP_BOOTDIR ]]; then var_target_initrd_dir="/var/lib/kdump" mkdir -p "$var_target_initrd_dir" KDUMP_INITRD="$var_target_initrd_dir/$kdump_initrd_base" else KDUMP_INITRD="$KDUMP_BOOTDIR/$kdump_initrd_base" fi } get_watchdog_drvs() { local _wdtdrvs _drv _dir for _dir in /sys/class/watchdog/; do # device/modalias will return driver of this device [[ -f "$_dir/device/modalias" ]] \|\| continue _drv=$(< "$_dir/device/modalias") _drv=$(modprobe --set-version "$KDUMP_KERNELVER" -R $_drv 2>/dev/null) for i in $_drv; do if ! [[ " $_wdtdrvs " == " $i "* ]]; then _wdtdrvs="$_wdtdrvs $i" fi done done echo $_wdtdrvs } # # prepare_cmdline <commandline> <commandline remove> <commandline append> # This function performs a series of edits on the command line. # Store the final result in global $KDUMP_COMMANDLINE. prepare_cmdline() { local cmdline id if [ -z "$1" ]; then cmdline=$(cat /proc/cmdline) else cmdline="$1" fi # These params should always be removed cmdline=$(remove_cmdline_param "$cmdline" crashkernel panic_on_warn) # These params can be removed configurably cmdline=$(remove_cmdline_param "$cmdline" "$2") # Always remove "root=X", as we now explicitly generate all kinds # of dump target mount information including root fs. # # We do this before KDUMP_COMMANDLINE_APPEND, if one really cares # about it(e.g. for debug purpose), then can pass "root=X" using # KDUMP_COMMANDLINE_APPEND. cmdline=$(remove_cmdline_param "$cmdline" root) # With the help of "--hostonly-cmdline", we can avoid some interitage. cmdline=$(remove_cmdline_param "$cmdline" rd.lvm.lv rd.luks.uuid rd.dm.uuid rd.md.uuid fcoe) # Remove netroot, rd.iscsi.initiator and iscsi_initiator since # we get duplicate entries for the same in case iscsi code adds # it as well. cmdline=$(remove_cmdline_param "$cmdline" netroot rd.iscsi.initiator iscsi_initiator) cmdline="${cmdline} $3" id=$(get_bootcpu_apicid) if [ ! -z ${id} ] ; then cmdline=$(append_cmdline "${cmdline}" disable_cpu_apicid ${id}) fi # If any watchdog is used, set it's pretimeout to 0. pretimeout let # watchdog panic the kernel first, and reset the system after the # panic. If the system is already in kdump, panic is not helpful # and only increase the chance of watchdog failure. for i in $(get_watchdog_drvs); do cmdline+=" $i.pretimeout=0" if [[ $i == hpwdt ]]; then # hpwdt have a special parameter kdumptimeout, is's only suppose # to be set to non-zero in first kernel. In kdump, non-zero # value could prevent the watchdog from resetting the system. cmdline+=" $i.kdumptimeout=0" fi done echo ${cmdline} } #get system memory size in the unit of GB get_system_size() { result=$(cat /proc/iomem \| grep "System RAM" \| awk -F ":" '{ print $1 }' \| tr [:lower:] [:upper:] \| paste -sd+) result="+$result" # replace '-' with '+0x' and '+' with '-0x' sum=$( echo $result \| sed -e 's/-/K0x/g' \| sed -e 's/+/-0x/g' \| sed -e 's/K/+/g' ) size=$(printf "%d\n" $(($sum))) # in MB unit let size=$size/1024/1024 # since RHEL-8.5 kernel round up total memory to 128M, so should user space let size=($size+127)/128 let size=$size128 # in GB unit let size=$size/1024 echo $size } get_recommend_size() { local mem_size=$1 local _ck_cmdline=$2 local OLDIFS="$IFS" last_sz="" last_unit="" start=${_ck_cmdline: :1} if [ $mem_size -lt $start ]; then echo "0M" return fi IFS=',' for i in $_ck_cmdline; do end=$(echo $i \| awk -F "-" '{ print $2 }' \| awk -F ":" '{ print $1 }') recommend=$(echo $i \| awk -F "-" '{ print $2 }' \| awk -F ":" '{ print $2 }') size=${end: : -1} unit=${end: -1} if [ $unit == 'T' ]; then let size=$size1024 fi if [ $mem_size -lt $size ]; then echo $recommend IFS="$OLDIFS" return fi done IFS="$OLDIFS" } # return recommended size based on current system RAM size kdump_get_arch_recommend_size() { if ! [[ -r "/proc/iomem" ]] ; then echo "Error, can not access /proc/iomem." return 1 fi arch=$(lscpu \| grep Architecture \| awk -F ":" '{ print $2 }' \| tr [:lower:] [:upper:]) if [ $arch == "X86_64" ] \|\| [ $arch == "S390X" ]; then ck_cmdline="1G-4G:160M,4G-64G:192M,64G-1T:256M,1T-:512M" elif [ $arch == "AARCH64" ]; then ck_cmdline="2G-:448M" elif [ $arch == "PPC64LE" ]; then if is_fadump_capable; then ck_cmdline="4G-16G:768M,16G-64G:1G,64G-128G:2G,128G-1T:4G,1T-2T:6G,2T-4T:12G,4T-8T:20G,8T-16T:36G,16T-32T:64G,32T-64T:128G,64T-:180G" else ck_cmdline="2G-4G:384M,4G-16G:512M,16G-64G:1G,64G-128G:2G,128G-:4G" fi fi ck_cmdline=$(echo $ck_cmdline \| sed -e 's/-:/-102400T:/g') sys_mem=$(get_system_size) result=$(get_recommend_size $sys_mem "$ck_cmdline") echo $result return 0 } # Print all underlying crypt devices of a block device # print nothing if device is not on top of a crypt device # $1: the block device to be checked in maj:min format get_luks_crypt_dev() { local _type [[ -b /dev/block/$1 ]] \|\| return 1 _type=$(blkid -u filesystem,crypto -o export -- "/dev/block/$1" \| \ sed -n -E "s/^TYPE=(.)$/\1/p") [[ $_type == "crypto_LUKS" ]] && echo $1 for _x in /sys/dev/block/$1/slaves/; do [[ -f $_x/dev ]] \|\| continue [[ $_x/subsystem -ef /sys/class/block ]] \|\| continue get_luks_crypt_dev "$(< "$_x/dev")" done } # kdump_get_maj_min <device> # Prints the major and minor of a device node. # Example: # $ get_maj_min /dev/sda2 # 8:2 kdump_get_maj_min() { local _majmin _majmin="$(stat -L -c '%t:%T' "$1" 2> /dev/null)" printf "%s" "$((0x${_majmin%:})):$((0x${_majmin#:}))" } get_all_kdump_crypt_dev() { local _dev _crypt for _dev in $(get_block_dump_target); do _crypt=$(get_luks_crypt_dev $(kdump_get_maj_min "$_dev")) [[ -n "$_crypt" ]] && echo $_crypt done } check_vmlinux() { # Use readelf to check if it's a valid ELF readelf -h $1 &>/dev/null \|\| return 1 } get_vmlinux_size() { local size=0 while read _type _offset _virtaddr _physaddr _fsize _msize _flg _aln; do size=$(( $size + $_msize )) done <<< $(readelf -l -W $1 \| grep "^ LOAD" 2>/dev/stderr) echo $size } try_decompress() { # The obscure use of the "tr" filter is to work around older versions of # "grep" that report the byte offset of the line instead of the pattern. # Try to find the header ($1) and decompress from here for pos in `tr "$1\n$2" "\n$2=" < "$4" \| grep -abo "^$2"` do if ! type -P $3 > /dev/null; then ddebug "Signiature detected but '$3' is missing, skip this decompressor" break fi pos=${pos%%:} tail -c+$pos "$img" \| $3 > $5 2> /dev/null if check_vmlinux $5; then ddebug "Kernel is extracted with '$3'" return 0 fi done return 1 } # Borrowed from linux/scripts/extract-vmlinux get_kernel_size() { # Prepare temp files: local img=$1 tmp=$(mktemp /tmp/vmlinux-XXX) trap "rm -f $tmp" 0 # Try to check if it's a vmlinux already check_vmlinux $img && get_vmlinux_size $img && return 0 # That didn't work, so retry after decompression. try_decompress '\037\213\010' xy gunzip $img $tmp \|\| \ try_decompress '\3757zXZ\000' abcde unxz $img $tmp \|\| \ try_decompress 'BZh' xy bunzip2 $img $tmp \|\| \ try_decompress '\135\0\0\0' xxx unlzma $img $tmp \|\| \ try_decompress '\211\114\132' xy 'lzop -d' $img $tmp \|\| \ try_decompress '\002!L\030' xxx 'lz4 -d' $img $tmp \|\| \ try_decompress '(\265/\375' xxx unzstd $img $tmp # Finally check for uncompressed images or objects: [[ $? -eq 0 ]] && get_vmlinux_size $tmp && return 0 # Fallback to use iomem local _size=0 for _seg in $(cat /proc/iomem \| grep -E "Kernel (code\|rodata\|data\|bss)" \| cut -d ":" -f 1); do _size=$(( $_size + 0x${_seg#-} - 0x${_seg%-*} )) done echo $_size } PK��jD#]i�d&��d&��kdump-logger.shnu�ȯ��PK��jD#]9e/��&��kdump-lib-initramfs.shnu��[��PK��jD#]��y{��y{��A��kdump-lib.shnu�ȯ��PK��

| ver. 1.4 | Github | . | PHP 8.2.30 | Generation time: 0 | proxy | phpinfo | Settings